S-Plastics Stat-kon Ultem_UC3000 resin is 30% carbon fiber reinforced PEI. High modulus with shielding/conductive characteristics for high-heat applications.
| TYPICAL PROPERTIES (1) | |||
| MECHANICAL | Value | Unit | Standard |
| Tensile Stress, brk, Type I, 5 mm/min | 172 | MPa | ASTM D 638 |
| Tensile Strain, brk, Type I, 5 mm/min | 4.4 | % | ASTM D 638 |
| Flexural Stress, brk, 2.6 mm/min, 100 mm span | 234 | MPa | ASTM D 790 |
| Flexural Modulus, 2.6 mm/min, 100 mm span | 15060 | MPa | ASTM D 790 |
| IMPACT | Value | Unit | Standard |
| Izod Impact, notched, 23°C | 42 | J/m | ASTM D 256 |
| Instrumented Impact Total Energy, 23°C | 6 | J | ASTM D 3763 |
| THERMAL | Value | Unit | Standard |
| HDT, 1.82 MPa, 6.4 mm, unannealed | 210 | °C | ASTM D 648 |
| PHYSICAL | Value | Unit | Standard |
| Specific Gravity | 1.39 | - | ASTM D 792 |
| ELECTRICAL | Value | Unit | Standard |
| Volume Resistivity | 2.E+01 | Ohm-cm | ASTM D 257 |
| Surface Resistivity | 3.E+03 | Ohm | ASTM D 257 |
| Static Decay, 5000V to <50V | 0.01 | < seconds | FTMS101B |
| Source GMD, last updated:07/19/2001 | |||
| Parameter | ||
| Injection Molding | Value | Unit |
| Drying Temperature | 150 | °C |
| Drying Time | 4 - 6 | hrs |
| Drying Time (Cumulative) | 24 | hrs |
| Maximum Moisture Content | 0.02 | % |
| Melt Temperature | 380 - 425 | °C |
| Nozzle Temperature | 375 - 420 | °C |
| Front - Zone 3 Temperature | 380 - 425 | °C |
| Middle - Zone 2 Temperature | 370 - 420 | °C |
| Rear - Zone 1 Temperature | 360 - 405 | °C |
| Mold Temperature | 135 - 165 | °C |
| Back Pressure | 0.3 - 0.7 | MPa |
| Screw Speed | 40 - 70 | rpm |
| Shot to Cylinder Size | 40 - 60 | % |
| Vent Depth | 0.025 - 0.076 | mm |
| Source GMD, last updated:07/19/2001 | ||
Other related products we recommend:
|
For more information please download the datesheet |
|
 |
S-Plastics Stat-kon Ultem_UC3000.pdf |
|
Get The Latest Quotation
First-level distribution source in South China Reduce procurement costs, improve supply stability, Help you find the most suitable engineering plastic materials
|
